Get matched with top fencing pros in Lincoln, MI

Most people prefer to keep the fence level by “stepping” the fence when running a horizontal fence over a slope. Stepping involves raising each panel between the posts as the fence moves over changes in slope, giving the fence line the appearance of stair steps. While this may be the preferred method of running a horizontal fence up a slope, there’s nothing wrong with installing your fence so it follows the undulations in the ground instead.

Ideally, when you replace a fence post, you should also replace the concrete footing. The concrete bonds to your new post, creating a secure base. If you install a new post into old concrete, it won’t be as sturdy.

That said, it is possible. Sometimes the post will lift right out of the concrete. If not, you can use a high-lift car jack to try and lift the pole out of the footing. Put the new post into the same hole and backfill it with fast-setting concrete. Keep in mind, this won’t work well for metal posts.

A fence installer or homeowner should place a snow fence upwind of the desired drift area, while keeping the prevailing wind direction in mind. When installing a snow fence, its posts should be sturdy, as they will be the weakest areas in terms of tensile strength. Posts should be buried at one-third their height and placed no more than eight feet apart.

You can reuse chain link fences as long as they’re in good condition. The best part—reusing it helps you make the most of the cost of a chain link fence. Whether you want to reuse it or consider asking someone to remove it for you in exchange for a free fence, it’s possible. If you can’t find a location for it in your yard, you can repurpose a chain link fence by donating it to a local animal shelter or community garden.