Top-rated countertop and backsplash pros.

Best countertop and backsplash pros near Laurium, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Laurium, MI?

Select your specific project to find the pro for you.

Top-Rated Countertop and backsplash pros in Laurium - Updated Nov 2026

Avatar for WELCH TILE & MARBLE
WELCH TILE & MARBLE
4.9(
11
)
Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Laurium, MI and surrounding areas

In business since 1987

Free estimates

Credit card accepted

"Brady came and gave me an estimate.  They were able to start the work the next day.  It went quite well.  They ran into a slight problem in that some of the sub floor came up with the tile.  But it did not result in much of a price increase.  The floor was extremely uneven, but after they were finished, it was even and ready for us to install our floating floor.  They did a great job.
"
Recommended by100%of homeowners
Countertops and Backsplashes FAQs, answered by experts

With proper care, Corian® countertops can last 20 to 30 years, and they typically come with a 10-year warranty. To maximize their longevity, it is important to fix any damage as soon as possible, clean up spills immediately, and address cosmetic issues promptly. Scratches, stains, and even burns can often be buffed out with sandpaper, and water stains can be treated with a specific water stain remover.

While epoxy resin is generally durable, it is not scratch-proof. Some sources state it is highly resistant to scratches from minor sources, while others note it can scratch and chip easily from sharper or heavier items. To prevent damage, always use a cutting board and avoid sliding heavy or rough-bottomed objects across the surface. If a scratch does occur, be aware that epoxy can be difficult to repair by sanding, often requiring an orbital sander for effective results.

The standard kitchen countertop height is 36 inches, so a 37-inch countertop should work fine. However, if you’re 5’4” or shorter, a 37-inch countertop might be too high. Ideally, the countertop will be three to four inches below your elbows.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The best budget-friendly countertop option depends on personal preference. Concrete is a great alternative to more expensive materials, as it can be cured and treated for unique designs. Another cheap material worth considering is plywood. It can be laminated or stained to suit nearly any aesthetic. Granite remnants are also a good choice. 

The Laurium, MI homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.