Get matched with top window and door contractors in Irons, MI

Window screen repair costs an average of $310, with a typical range of $100 to $480. The final price depends on several factors, including the window size, accessibility, screen type, whether the frame needs replacement, and especially the screen material.

The cost of window screen materials varies widely based on durability and features:

• Fiberglass: $35–$200

• Aluminum: $50–$300

• Copper: $90–$850

• Stainless Steel: $45–$400

• Brass: $100–$900

• Solar: $55–$850

• Security: $100–$1,000

• Vinyl: $25–$120

Costs also differ by screen type. For instance, a prefabricated screen might cost only $40, moveable screens typically run $25 to $75, and retractable screens range from $300 to $900. To save money, you can choose more affordable materials like vinyl or fiberglass, opt to rescreen instead of replacing the entire frame, and have multiple screens repaired at once to reduce labor costs.

Yes, you can add a screen door to most door frames. The screen should be able to fit standard-size door frames, so unless you have an unusually sized door, you shouldn’t have an issue. Just make sure to properly measure the frame. When in doubt, it’s best to let a pro take care of this task for you so it’s installed correctly.

If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.

Window seals don’t last forever, so they’ll inevitably fail for one reason or another. One of the most common reasons is the expansion and contraction of the glass. When the glass gets warm from sunlight, it expands and adds pressure to the seal; at night, as the glass cools, it contracts. This process, day in and day out, can eventually cause the seal to fail. Other common sources of failure include the house settling over time, chemicals that damage the seal when repainting windows, and incorrect window installation.