Can you put a doorway in a structural wall?

• <div><p>Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.</p></div>

Get matched with top structural engineers in Gobles, MI

Q: How do contractors cut a doorway in a concrete block wall?

• <div><p>First, most contractors will have a structural engineer create a report and plan for your project to ensure it&rsquo;s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening&mdash;allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they&rsquo;ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. </p></div>

Q: How much does a structural engineer cost?

• <div><p>The average cost to hire a structural engineer is about $550, with prices generally ranging from $200 to $1,500. Structural engineers may charge a flat rate, by the project, by square footage, or an hourly rate, which is typically between $100 and $250. Many jobs, such as inspections and structural calculations, are billed at a flat rate, which often falls between $300 and $800. The final cost depends on several factors, including the project's type, scope, size, complexity, ease of access for inspection, and your geographic location.</p></div>

Q: What are the disadvantages of a cathedral ceiling?

• <div><p>Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you&rsquo;re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb. </p></div>

Q: Can I do my own structural calculations?

• <div><p>No, it&rsquo;s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Gobles, MI?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Gobles, MI

*The Angi rating for Structural Engineering companies in Gobles, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Gobles, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on March 06, 2019

Reviewed in March 2019
Kevin was a great engineer for remodeling our basement. He completely built in the basement. Two bedrooms, office, closets, bathroom. Hallway. Painted. Flooring. Paneling, ceiling. Plumbing. Electricity. And added a hearth to fireplace.
Markin Co.
Request a quote
Reviewed in June 2018
Both the interior and exterior were beautifully detailed. The engine was not included in the proposal.
Great Lakes Chemical Services Inc
Request a quote
Reviewed in January 2018
Turnkey identified structural damage in which they were able to correct without interruption to the overall project and at a very reasonable price. It was a huge advantage going with them as a total contractor as opposed to a company who only does roofs.
Turnkey Builders LLC
Request a quote
Reviewed in January 2018
Due to a growing family we needed room. My wife and I decided to expand in our existing home rather than move out of the area we love. We added a family room, two bedrooms with egress windows and a full bathroom to out basement. Having worked in the electrical contracting industry for over 20...
Larrabee Construction
Request a quote
Reviewed in November 2016
My wife and I worked with Jon on an extensive renovation/remodel, and addition. A large, complicated project to say the least. Jon stuck with us through many, many, revisions... The entire time being patient and professional. Jon's expertise and knowledge in structure and engineering helped...
Schultz Architecture
Request a quote
Reviewed in November 2015
<p>The previous homeowner attempted his own repairs and only made the problems worse. The basic work on resurfacing the flat roof was pretty straightforward. The challenge was to provide drainage without installing gutters. Exposed guttering would have spoiled the look of the house. Their...
MODERN ROOFING INC
Request a quote
Reviewed in January 2014
Suggestions by builder greatly improved overall design and structure. This is the second project Tom Scheffers has done. The first was adding a bathroom to the first floor and converting the previous bath to a pantry. We have discussed Scheffers building a house for us in the future. Now all we...
Scheffers Construction Co
Request a quote
Reviewed in April 2013
He came in on-budget and on-time. We call him when we have an issue and his subcontractors are just as dependable. He's got both an engineering and an architectural degree, which makes him worth waiting for, because the structure of the house is just great. He used materials that were...
Hoogstraten Builders Inc
Request a quote
Reviewed in January 2013
All work was completed in a timely manner (a rare event in my experience <br /> with builders) and was satisfactory in almost all aspects. In <br /> retrospect, however, I should have used someone else for this particular <br /> job. I am very picky about finish; the person who did the finish...
VanDam & Krusinga Building & Restoration
Request a quote

Find Structural engineers in Gobles

Robert Cowles PE

5.0(

)

Serving Gobles, MI and surrounding areas

Approved

In business since 2004

Offers commercial services

"Robert responded quickly to my request. He provided me with the services I needed in a timely fashion. I would recommend Robert Cowles PE for your project."

Response time1 day

13 neighbors recently requested a quote

Request Quote

Foundation Specialist, LLC

4.2(

)

Serving Gobles, MI and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"Great. From the project manager - Bryan Foster - to the crew chief - Shane - I don't think I could have been in better hands. Professional, knowledgeable, polite, hard working, on time, no surprises, and they left the place cleaner than it was before they came!! I highly recommend this company and the individuals I mentioned."

Recommended by85%of homeowners

Request Quote

Structural Engineering questions, answered by experts

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar.

The average cost to hire a structural engineer is about $550, with prices generally ranging from $200 to $1,500. Structural engineers may charge a flat rate, by the project, by square footage, or an hourly rate, which is typically between $100 and $250. Many jobs, such as inspections and structural calculations, are billed at a flat rate, which often falls between $300 and $800. The final cost depends on several factors, including the project's type, scope, size, complexity, ease of access for inspection, and your geographic location.

Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you’re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb.

Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

The Gobles, MI homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
May 30, 2026May 30, 2026
How Much Does Steel I-Beam Installation Cost? [2026 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does a Structural Engineer Cost to Hire? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Rachel Hoffman
•
Apr 4, 2026Apr 4, 2026
Who Can Check if a Wall Is Load-Bearing?
Before removing a wall, make sure it’s not load-bearing. Learn the benefits of hiring a structural engineer to check if a wall is load-bearing.
Rachel Hoffman
•
May 3, 2026May 3, 2026
15 Warning Signs That a House Will Collapse
A home doesn’t collapse unexpectedly. Learn the warning signs that a house will collapse, so you can protect your family and your home.
Rachel Hoffman
•
Mar 6, 2026Mar 6, 2026
Structural Inspection vs. Home Inspection: Which Is Right for You?
Knowing the difference between structural inspections vs. home inspections is easy with this convenient guide. Learn when you might get each one done.