Top-rated roofers.

Best roofers near Frankfort, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your roofing project in Frankfort, MI?

Select your specific project to find the pro for you.

TRUSTED BY FRANKFORT, MI HOMEOWNERS

  • Average homeowner rating star icon4.2
    Average homeowner rating
  • Verified reviews icon48
    Verified roofing services reviews

Top-Rated Roofers in Frankfort - Updated Nov 2026

Avatar for D and L Commercial Roofing, LLC
D and L Commercial Roofing, LLC
4.9(
46
)
Flat, Foam or Single Ply Roofing - Repair- For BusinessFlat, Foam, or Single Ply Roofing - Install or Replace- For BusinessMetal Roofing - Install or Replace - For Business+2 more

Serving Frankfort, MI and surrounding areas

Approved

Super Service Award Winner

In business since 2020

Free estimates

Warranties offered

"Speaking on behalf of our business, we were very pleased with the install of a new roof drain, replacing an old plugged drain and the removal of @ 50,000-pounds of water off our warehouse roof. We know shall need additional maintenance and roof repairs and D&L Commercial Roofing shall be our first choice to keep our old building in tip-top shape."
Response time1 day
Response rate95%
Recommended by8%of homeowners
Avatar for White Pine Renovation
White Pine Renovation
5.0(
20
)
Asphalt Shingle Roofing - Install or ReplaceMetal Roofing - Install or ReplaceMetal Roofing - Install or Replace - For Business

Serving Frankfort, MI and surrounding areas

Approved

In business since 2020

Free estimates

Warranties offered

"White Pine Renovation was great to work with. The owner, Eric, was friendly but not pushy and made sure our project was completed quickly and without a hitch. The work crew was efficient and hard working. Our new metal roof is beautiful and I am sure it will be for years to come. I highly recommend White Pine Renovation."
Insulated Composite
Stone Siding
Board and Batten
Triple-Pane
Durable

+18

Response time5 hrs
Response rate99%
32 neighbors recently requested a quote
...
Showing 1-10 of 103
Roofing FAQs, answered by experts

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

  • Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

  • Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Installing solar panels involves drilling small holes in your roof to secure the solar panel mounting brackets. These brackets hold the solar panels in place and must withstand strong weather conditions so they’re secured into your roof. However, holes and screws are sealed to prevent leaking and further damage.

While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.

No, a chimney crown is not the same as a chimney cap. A chimney crown is a flat cement area on top of a masonry chimney. It starts where the masonry part of the chimney ends at the very top and domes upward toward the flue opening. A chimney cap sits on top of the crown over the flue. It is usually made of metal and allows smoke to escape without letting in rainwater.

Maybe you waited a little longer than you should have before dealing with the snow accumulation on your roof, and now you are wondering if there is risk of roof collapse. Here are some signs you should look out for: a sagging roof, cracking and cracking sounds, cracks in walls, and leaks in your attic and ceiling.

If you suspect potential roof collapse, do not delay. Take immediate action. Call a professional roofing company and get an inspection. You may want to move your belongings to a safe place and relocate your family until everything has been taken care of.

The Frankfort, MI homeowners’ guide to roofing services

From average costs to expert advice, get all the answers you need to get your job done.