Get matched with top countertop and backsplash pros in Athens, MI

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The short answer is yes. A stone-safe, pH-neutral cleaner and a soft cloth are all you need to clean and maintain terrazzo. Harsh cleaners aren’t necessary. You can also apply stone polish every few months to refresh your terrazzo.  

It’s recommended that you clean your terrazzo countertops daily to remove dust before it begins to build up. Dust and other debris can cause small scratches over time. If you spill something, be sure to clean it up immediately before stains set in.

Butcher block countertops are durable, but wood is generally susceptible to extreme heat, so you should avoid placing hot pots and pans directly on a butcher block counter. This will likely cause some aesthetic damage in the form of scorch marks. Instead, invest in some trivets and put your hot cookware on top of them.

Extensive chips and cracks may require a full replacement of the countertop. The cost to install a new countertop is around $3,100 on average. But, if the damaged area is relatively small, you may want to consider repairing it yourself or calling in a qualified professional. Depending on the material, some epoxy and sandpaper may do the trick. Or you can consider painting laminate countertops or refinishing butcher block countertops.