Get matched with top french drain pros in Ada, MI

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Liquid drain cleaners are harsh chemicals that can erode your pipes. To treat a slow drain or for preventative maintenance, pour hot water down the drain to break up gunk and help move it along. Make sure the water isn’t boiling hot (keep it under 140 degrees Fahrenheit) if you have plastic pipes. However, you’ll need to pull the clog out for bigger backups. 

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.

Some homeowners use additives every month to help septic system performance, but according to the U.S. Environmental Protection Agency, the effectiveness of septic system and leach field additives is unknown. Further, additives made with organic solvents or alkali chemicals can actually be harmful to the necessary bacteria in a septic system.