Get matched with top concrete driveway pros in Sangerville, ME

On average, concrete costs less than pavers for the same project. Standard broom-finished concrete costs from $2 to $15 per square foot. Stamped concrete costs between $8 to $28 per square foot. On the other hand, pavers cost from $8 to $50 per square foot. For any of these materials, the cost depends on which concrete finish or paver you choose. Keep in mind that the layout complexity, amount of site preparation, and location factor into the cost, too.

Factors like the time of day you choose to seal the concrete, temperature, humidity, and airflow will impact drying time. To shorten the drying time, seal concrete in the late afternoon on a day with a temperature between 45 to 85 degrees Fahrenheit.

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.

Although some concrete cracks are cosmetic, others can be more serious. Cracks wider than ⅛ inch or that extend through the slab are serious and can cause structural damage. If you notice these types of cracks in your concrete patio, contact a local contractor who installs concrete patios to inspect the damage and determine how to fix it.