Get matched with top roofers in Sangerville, ME

No, a metal roof will not make your house hot. In fact, metal roofs help keep your home cooler by reflecting heat instead of absorbing and transmitting it inside. Metal also has high thermal conductivity, which means it gains and loses heat quickly. While the sun may heat the metal, the roof rapidly transfers that heat back into the air rather than retaining it. This reflective property can lead to energy cost savings of up to 40%, as your cooling system won't need to work as hard to maintain a consistent indoor temperature.

If you’re building the roof trusses yourself, which isn’t recommended, it will be more affordable than buying pre-built trusses. Trusses cost more because they use the same amount of material, but you’ll also be paying for the labor, as well as the delivery to your home. However, if you’re having a contractor build the roof for you, then trusses will be less expensive, as the labor costs to build roof framing on-site will cost more.

Roofing estimates and inspections are not the same thing. Roofing inspections (whether done with a drone or by the traditional method) help you find any damage or defects on a roof. You will pay a set fee for a roofing inspection and use it to get certification or to determine whether repair or replacement is necessary. Beware of unsolicited contractors coming to your home and offering a so-called free roof inspection—these are often scams.

Roofing estimates, on the other hand, are typically free and offered by a roofing company hoping to earn your business. Some roofing estimates are performed with drones, while other companies will still opt to send people up onto the roof. Either way, the estimate is for roof repair or replacement costs the company wants you to hire them for.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.