Get matched with top asbestos removal specialists in Old Town, ME

By using PPE, sealing work areas, and following containment procedures.

Since DIY asbestos removal isn’t the best option to save money, there are other steps that you can take to help cut costs when dealing with this project. After speaking with your asbestos removal expert, discuss if encapsulation is an option. If it is, you can save between 15% to 25% on overall project costs over demolition and disposal. In addition, when speaking with your professional, discuss if there are any tax credits available for your removal project. Finally, check with your homeowner’s insurance to see if any removal costs might be covered. However, be aware that this is usually only applicable if the asbestos is due to a covered incident, like a tree falling into your roof.  

Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.

While there are some sealants designed to be spray-painted over asbestos to encapsulate it, you still want to make sure it’s a specifically designed product for this purpose—not just run-of-the-mill spray paint. Furthermore, be sure you aren’t inadvertently spraying the asbestos fibers around when you take on this project, and as always, be sure to wear the proper protective gear, including a P-100-rated respirator and a disposable body suit, so as not to inadvertently breathe in or spread asbestos fibers.