Top-rated wrought iron fencing repair pros.

Get matched with top wrought iron fencing repair pros in Lincolnville, ME

Enter your ZIP and get matched with up to 5 pros

Need a pro for your wrought iron fencing repair project in Lincolnville, ME?

Select your specific project to find the pro for you.

Find Wrought iron fencing repair pros in Lincolnville

Avatar for RPM Welding & Fabrication

RPM Welding & Fabrication

4 Garrison Woods Drive
New on AngiNew on Angi
Approved Pro

RPM Welding & Fabrication

4 Garrison Woods Drive
New on AngiNew on Angi
Approved Pro
4 years of experience
Free onsite estimate

RPM Welding & Fabrication is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business.

RPM Welding & Fabrication is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business.


Avatar for Splatter Paint and Home Improvement services

Splatter Paint and Home Improvement services

No reviews yet

Splatter Paint and Home Improvement services

No reviews yet
1 years of experience

Our business has more than 25 years of exterior and interior painting experience,we also offer just about any handyman project you need built, repaired or can dream up. We also offer cleaning services from in home to production level. There is honestly very little we can't do for you,so gives us a chance. It's a decision you won't regret! Free estimate

Our business has more than 25 years of exterior and interior painting experience,we also offer just about any handyman project you need built, repaired or can dream up. We also offer cleaning services from in home to production level. There is honestly very little we can't do for you,so gives us a chance. It's a decision you won't regret! Free estimate


NB welding & piping

1717 Main St Mapelton ME
No reviews yet

NB welding & piping

1717 Main St Mapelton ME
No reviews yet

We are a certified and insured welding company that specializes in welding repair/ new fabrication project/ industrial pipe welding and plumbing. We are on site and can travel anywhere to get the job done!

We are a certified and insured welding company that specializes in welding repair/ new fabrication project/ industrial pipe welding and plumbing. We are on site and can travel anywhere to get the job done!


GEM Housing Services

No reviews yet

GEM Housing Services

No reviews yet
5 years of experience

GEM Housing Services exists to raise the standards of the home improvement industry and change our towns and cities for the better. We specialize in precise, sustainable construction projects, and attempt to guide you through the process for an unmatched experience.

GEM Housing Services exists to raise the standards of the home improvement industry and change our towns and cities for the better. We specialize in precise, sustainable construction projects, and attempt to guide you through the process for an unmatched experience.


"Great! He kept in touch and arrived when he said he would. He is clean and personable. He was able to finish within his estimated time for this project."

Robin B on July 2024

Soucys property improvements llc is your go-to handyman. over 15 years experience on improving properties.

"Great! He kept in touch and arrived when he said he would. He is clean and personable. He was able to finish within his estimated time for this project."

Robin B on July 2024



Nickerson Custom Computing

277 Pout Town Rd
No reviews yet

Nickerson Custom Computing

277 Pout Town Rd
No reviews yet
12 years of experience

Since the 90's I've been repairing things around the home. I've worked on things from lawn mowers to gutters, if its around the house I've probably repaired it. In the 90's as a kid I mainly performed landscaping services but, over time this escalated into general repairs like fixing a leaky sink. from 2000 to 2013 I got a bit more serious and started a computer repair business. My repair business taught me a lot about customer satisfaction and how important it is to be thorough. During the time when I wasn't running my computer repair Shop I worked as a painter/carpenter part time. I ended up getting more calls to repair things like missing shingles on a roof or damaged trim on a someones garage.I figured with all the requests to repair things around the home I should become a contractor. I decided to go back to school and get a degree in business. I graduated with a 3.74 GPA and went to work. For the past few years I have been taking on more serious projects and I haven't had a dissatisfied customer yet. I love pleasing people and I love seeing the results of my projects. I thrive for building and repairing things. And someday I hope my work recognized by many.

Since the 90's I've been repairing things around the home. I've worked on things from lawn mowers to gutters, if its around the house I've probably repaired it. In the 90's as a kid I mainly performed landscaping services but, over time this escalated into general repairs like fixing a leaky sink. from 2000 to 2013 I got a bit more serious and started a computer repair business. My repair business taught me a lot about customer satisfaction and how important it is to be thorough. During the time when I wasn't running my computer repair Shop I worked as a painter/carpenter part time. I ended up getting more calls to repair things like missing shingles on a roof or damaged trim on a someones garage.I figured with all the requests to repair things around the home I should become a contractor. I decided to go back to school and get a degree in business. I graduated with a 3.74 GPA and went to work. For the past few years I have been taking on more serious projects and I haven't had a dissatisfied customer yet. I love pleasing people and I love seeing the results of my projects. I thrive for building and repairing things. And someday I hope my work recognized by many.


Lipkvich Fabrication

Mariaville Address(call For Details)
5.00(
2
)

Lipkvich Fabrication

Mariaville Address(call For Details)
5.00(
2
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Lipkvich Fabrication is a young, but highly capable welding, fabricating and machining enterprise. We dedicate our ambitions and time to producing the highest quality of work at the best price. For quotes estimates or information regarding our capability and services call us or email us any time. Dont forget to like us on Facebook. Thank you for visiting our site and we hope to hear from you shortly.

"They did a great job!"

Rick W on July 2018

Lipkvich Fabrication is a young, but highly capable welding, fabricating and machining enterprise. We dedicate our ambitions and time to producing the highest quality of work at the best price. For quotes estimates or information regarding our capability and services call us or email us any time. Dont forget to like us on Facebook. Thank you for visiting our site and we hope to hear from you shortly.

"They did a great job!"

Rick W on July 2018


Citoss

1 Flagg St
No reviews yet

Citoss

1 Flagg St
No reviews yet
9 years of experience

We are a new veteran owner company servicing all regions of Maine. Currently we have two employees and specialize in landscaping and irrigation systems. We also provide a wide array of "handyman" services, so feel free to reach out. We can work with any budget and will work with you to make the billing process as simple as needed. Fair, honest and affordable.

We are a new veteran owner company servicing all regions of Maine. Currently we have two employees and specialize in landscaping and irrigation systems. We also provide a wide array of "handyman" services, so feel free to reach out. We can work with any budget and will work with you to make the billing process as simple as needed. Fair, honest and affordable.


Faucher's Home Improvement

494 Quaker Road
2.00(
1
)

Faucher's Home Improvement

494 Quaker Road
2.00(
1
)
17 years of experience

Home Remodeling, BBB, Certified, Insured, Deposit required before start of all projects, bonuses for business referrals accepted.

"Electrical and plumbing were subcontracted and I have no complaint on their work. However for the work this contractor performed.....It started out okay, complimented his work... But by the time the last of the porch repair and the bathroom reno was completed I realised I had made a huge error of judgement. He insisted in starting the porch work in the fall and then over the winter. When the ground thawed in the spring and the supports no longer met the concrete footing blocks, he used rigid foam boards to shim the concrete blocks up to meet the posts. The floorboards had been removed and proper footings could have been sunk below the frost line, instead it had to be jury rigged and as the ground heave sin the winter and thaws back down, I expect it to be only a matter of time before the folly of this becomes apparent and I will have to get a competent contractor in to fix it. The bathroom was to have a radiant heat floor put in, but the system installed is not meant to be used in a wet room. There is baseboard heat with a pipe running through the floor and that was "sealed" with a piece of moulding and if there is any problem with the heater or the pipe breaks it is harder to get to, nevermind just being able to clean it. I was concerned over the floor system and he promised me that a letter would be coming from the manufacturer saying the system was safe as installed. I spoke to a company rep and they cannot sign off on an installation that they did not witness. So I am unable to recommend this contractor based on any sense I have of his integrity. I am back to using a space heater and When I am able to I will have to have the floor taken up and the correct system put in. There are numerous other minor things, such as the laminate floor being laid with no regard to the pattern on the boards so the same pattern piece was used 3 times next to each other. I did look up how to install this type of floor and found plenty of instructive videos saying how the boards are usually separated by pattern and then laid down in such a way to be random and give the illusion of real wood. The result on my floor does not demonstrate to me an attention to detail. The light over the shower, an upgraded ceiling fan, an additional outlet or two were all part of the plan but were never installed. There were assertions like a new outlet would have cost $400. I checked with the electrician myself and was told that was not the price they would charge and did not understand why that would have been quoted. When issues were raised it was mentioned that he had a lien on someone's house who didn't want to pay for their finished projects. So, there is a lot of work to redo and since the money isn't there I will have to live with things as they are for a while. Not the result I was expecting after 6 months (way beyond the estimated time) of work having been done and at no small expense. I will try to post photos to illustrate what I have mentioned above."

Chrystine H on September 2019

Home Remodeling, BBB, Certified, Insured, Deposit required before start of all projects, bonuses for business referrals accepted.

"Electrical and plumbing were subcontracted and I have no complaint on their work. However for the work this contractor performed.....It started out okay, complimented his work... But by the time the last of the porch repair and the bathroom reno was completed I realised I had made a huge error of judgement. He insisted in starting the porch work in the fall and then over the winter. When the ground thawed in the spring and the supports no longer met the concrete footing blocks, he used rigid foam boards to shim the concrete blocks up to meet the posts. The floorboards had been removed and proper footings could have been sunk below the frost line, instead it had to be jury rigged and as the ground heave sin the winter and thaws back down, I expect it to be only a matter of time before the folly of this becomes apparent and I will have to get a competent contractor in to fix it. The bathroom was to have a radiant heat floor put in, but the system installed is not meant to be used in a wet room. There is baseboard heat with a pipe running through the floor and that was "sealed" with a piece of moulding and if there is any problem with the heater or the pipe breaks it is harder to get to, nevermind just being able to clean it. I was concerned over the floor system and he promised me that a letter would be coming from the manufacturer saying the system was safe as installed. I spoke to a company rep and they cannot sign off on an installation that they did not witness. So I am unable to recommend this contractor based on any sense I have of his integrity. I am back to using a space heater and When I am able to I will have to have the floor taken up and the correct system put in. There are numerous other minor things, such as the laminate floor being laid with no regard to the pattern on the boards so the same pattern piece was used 3 times next to each other. I did look up how to install this type of floor and found plenty of instructive videos saying how the boards are usually separated by pattern and then laid down in such a way to be random and give the illusion of real wood. The result on my floor does not demonstrate to me an attention to detail. The light over the shower, an upgraded ceiling fan, an additional outlet or two were all part of the plan but were never installed. There were assertions like a new outlet would have cost $400. I checked with the electrician myself and was told that was not the price they would charge and did not understand why that would have been quoted. When issues were raised it was mentioned that he had a lien on someone's house who didn't want to pay for their finished projects. So, there is a lot of work to redo and since the money isn't there I will have to live with things as they are for a while. Not the result I was expecting after 6 months (way beyond the estimated time) of work having been done and at no small expense. I will try to post photos to illustrate what I have mentioned above."

Chrystine H on September 2019

Showing 1-10 of 40
Wrought Iron Fencing Repair questions, answered by experts

WD-40 and other brands you’ll find in the hardware store have specific rust removal chemicals to help remove rust from metal surfaces. In fact, WD-40 originally served as a topical coating in the aerospace industry to prevent rust from forming on aircraft components. WD-40 is now most commonly used as a lubricant, but it’s still an excellent tool for cleaning rust off metal surfaces.

Your dog might be able to slip underneath chewable, flexible fabric gate covers. When you have a wayward woofer, using wooden panels that come within an inch or two of the ground is the most secure option. You may need a metal defense barrier dug into the soil to keep your dog from digging under your fence or gate.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

While many fence companies and fence material retailers refer to their metal fencing as wrought iron fencing, most of it is actually ornamental wrought iron fence. This means that the fence is made to look like traditional wrought iron but is actually made out of either steel or aluminum. Old wrought iron fences typically found at estate sales or on older properties are much heavier and much more prone to rust than the ornamental wrought iron that newer homes and fences use.

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

The Lincolnville, ME homeowners’ guide to wrought iron fencing repair services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"