Get matched with top drywall pros in Hartland, ME

The time it takes for thinset to dry is determined by your room’s ambient temperature and humidity levels. Assuming the average humidity level is around 40% with an average temperature of 70 degrees Fahrenheit, thinset can dry within 48 hours. Lower temperatures and higher humidity can extend the curing process beyond 72 hours, while high heat and zero humidity can shorten the curing process. However, thinset can crack if it dries too fast.

There are a few easy ways to locate a wall stud without a stud finder. First, try knocking on the wall with your knuckles. Most parts of the wall will sound hollow, but when you tap over a stud, it will sound more solid. Alternatively, since studs are spaced 16 or 24 inches apart, you can measure those distances from a corner of the room, which will always have a stud.

Whether you can reuse a drywall anchor or not depends on the type. Plastic expansion anchors and plastic self-drilling anchors, which expand once screwed into the wall, are single-use only. You can't straighten and reuse them after removing them from the wall.

Metal toggle bolts can be reused, provided you can successfully remove the toggle from behind the wall. Once you remove the bolt, the toggle often falls down and can be difficult to retrieve without removing the drywall.

You do not need to drywall over most types of garage insulation. However, doing so can increase noise reduction, make the space more attractive, and keep children and pets from touching harmful fiberglass insulation. If you’re using cellulose or some other type of blown-in insulation (fiberglass and mineral wool are common), you will need drywall to contain the insulation material.