Get matched with top fencing pros in Freedom, ME

Your wooden gate post hole should be a third to a half of the height of the post. Also, note that the diameter of the post hole should be three times the diameter of the post. You should set the post in concrete to ensure a long-lasting and durable post that will withstand the test of time.

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood. 

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

The cost to pressure wash a house ranges from $200 to $400 and unfortunately does not include fencing. That service will be an additional charge of between $150 and $350, depending on the size of your fence and the type of material it’s made of. This also applies for other services like pressure washing a patio or deck.