Get matched with top door pros in Durham, ME

Leaving vents open but closing doors in unused rooms will probably not save money on your energy bill. Closed doors prevent the natural flow of air throughout the home, which could reduce the efficiency of the overall HVAC system. They could also restrict airflow into and through the return vents, making the HVAC system less efficient.

Butt hinges are the most common of all door hinges. They’re frequently used in commercial and residential structures, secure interior and exterior doors, and can be used on cabinetry. They’re inexpensive, simple to install, easy to remove, and available in various materials and styles. They come with two leaves with a knuckle or barrel in the middle.

You can attach the hinges to either the door or the frame first, depending on your preference. The order will not affect how the door hangs or the ease of installation. However, we recommend starting with the top hinge over the bottom one for stability, as it’s much easier to support the door from below while you install the top hinge. It will also be easier to pull the door outward from the hinges as it hangs from the top than it would be to push the door toward the hinges, as there’s less clearance on the lock side.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.