Top-rated electricians.

Get matched with top electricians in Buckfield, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your electrical service project in Buckfield, ME?

Select your specific project to find the pro for you.

TRUSTED BY BUCKFIELD, ME HOMEOWNERS

  • Average homeowner rating star icon4.8
    Average homeowner rating
  • Verified reviews icon25
    Verified electrical services reviews

Verified Reviews for Electrical Service pros in Buckfield, ME

*The Angi rating for Electrical Service companies in Buckfield, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Electrical Service needs.

*The HomeAdvisor rating for Electrical Service companies in Buckfield, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Electrical Service needs.

Last update on June 18, 2025

Electrical questions, answered by experts

If you need to run a wire from the meter to the breaker box, start by turning off the power using the main switch to avoid injury risks from live wires. Then, locate the ground wire from your meter and connect it to the ground bar of the breaker box. Connect the neutral wire using the same method to improve your circuit efficiency.

Next, locate the hot wires running from the main switch to the meter. To connect them to the correct terminals from meter to breaker, unscrew the nuts of the breaker hotwire terminals, insert the positive hotwire, and ensure it’s firmly attached. Finally, secure the wires with electrical tape and wire tie cables before re-securing your breaker box. Keep in mind that this process can be dangerous, so don’t hesitate to hire a local electrician.

Typically, when a 3-way switch only works when one switch is on, this is one of the most telltale indicators that the switch has gone bad (although this could also be the result of faulty or loose wiring). To diagnose the issue, toggle each switch until the light comes on. Once it’s on, toggle each switch separately again; the switch that doesn’t turn the light off is the bad switch. 

The average cost to hire an electrician is around $350. However, every electrical job varies in scope, materials, and labor involved, so while you will likely pay anywhere between $85 and $1,100 for standard jobs, a project like rewiring a house can cost up to $30,000. You might also pay slightly higher prices if you need emergency work done or if the work involves accessing a hard-to-reach area in your home, like an attic or cramped crawlspace. You should ask your electrician for an estimate before agreeing to the work.

A GFCI outlet is easy to identify. It features two buttons on the face that read “TEST” and “RESET.” Sometimes, the “RESET” button is red. These are positioned in the center of the two three-prong plug-in slots you see on a regular outlet. Some also feature a green light to indicate when the outlet is working, changing to red when there is a problem.

Yes, a bad switch can cause other outlets not to work. If the switch is part of a circuit that controls multiple outlets, a fault in the switch can disrupt the entire circuit. It can happen if the switch is wired incorrectly, has a loose connection, or is damaged. Fixing or replacing the faulty switch can often restore power to the affected outlets

The Buckfield, ME homeowners’ guide to electrical services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"