Top-rated radon detection and reduction specialists.

Best radon detection and reduction specialists near Bryant Pond, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your radon detection and reduction project in Bryant Pond, ME?

Select your specific project to find the pro for you.

Top-Rated Radon detection and reduction specialists in Bryant Pond - Updated Nov 2026

Aqua-Max of Maine
4.4(
105
)
Radon Gas - Abatement

Serving Bryant Pond, ME and surrounding areas

In business since 1994

Free estimates

Warranties offered

"This year, my shop was in the basement (I make turned wooden bowls) radon level inexplicably increased from the 2.5 - 4.0 level to 8.0 - 11.0 level. I decided I was not going to work down there unless I did something about radon abatement. The guys said I needed one port under my basement floor, but I opted for two --- one near the exit port of the system and one in the center of the house. I had crushed stone and a vapor barrier under the floor, but radon was still getting in. After the installation lasting 3 hours, twenty-seven hours after install, the level was 0.83. Now after 1 week the level is 0.48 I am ok with that. I have not seen the results from the lab yet, but my continuous meter has been a good indication of what is happening. I am concerned now about radon in my drinking water, but cannot comment on that yet. Dick P Alna, ME"
Response time1 day
Recommended by96%of homeowners
Avatar for Rhino Radon Services
Rhino Radon Services
4.2(
9
)
Radon Gas - AbatementRadon Gas - Testing

Serving Bryant Pond, ME and surrounding areas

In business since 2014

Free estimates

Emergency services offered

"He was on time, arrived at 9am as quoted and began to install the system. The system required two suction points and a sump pit cover. The sump pit originally had a pedestal pump in place and none of the other radon companies would change the pedestal pump to a submersible pump as required for the mitigation system to function properly. Rhino Radon not only changed the pump but installed a back flow check valve to ensure proper functioning of the system. All of the other companies said we would have to employ a plumber or a handy man to get this done. Had we gone that route the closing would not have happened. Rhino Radon gladly did all the work required and didn't even break for lunch!!! He was more concerned with getting us out of the vacant house seeing we are already down the cape. The system that involved a crawl space and being vented through the garage roof was completed immaculately and the test results came back at 0.5 pCil/L. This pleased the lender and buyer and exceeded our expectations. We highly recommend Rhino Radon Services.
"
Recommended by100%of homeowners
Radon Detection and Reduction FAQs, answered by experts

The soil beneath your house is most likely what’s causing an increased level of radon. This is because soil holds radioactivity for a long time and it’s also what most buildings are built on. Another common source of radon is water from a source that hasn’t been through periodic radon tests, such as well water. Over time, the radon from the soil can inhabit other parts of your house like the foundation or plumbing.

Radon is present almost everywhere but, like sunlight, the concentration levels and how often you are exposed to it have a large part to play in just how dangerous it is. There are levels of radon that are acceptable inside a house, but above a certain limit, radon becomes a serious radioactive hazard that is a known cause of lung cancer. In fact, radon exposure is the number two leading cause of lung cancer (after smoking).

Ideally, no one will live in a house with elevated radon levels, as prolonged exposure increases the risk of serious health issues like lung cancer. However, homes with radon can be made safe through mitigation systems, such as active soil depressurization. Testing for radon regularly and addressing high levels helps ensure a safe living environment.

While DIY testing is possible, abatement generally requires professional installation to ensure efficacy and meet safety standards.

You'll need to test your home for radon after installing the mitigation system, then again every two years. If radon remains elevated, contact a licensed radon professional, either the contractor who installed the system or a different one, and have them evaluate the system. They may need to make some changes to improve its effectiveness and performance.

The Bryant Pond, ME homeowners’ guide to radon detection and reduction services

From average costs to expert advice, get all the answers you need to get your job done.