Get matched with top fencing pros in Kentwood, LA

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The cost to build a fence is about $3,100 on average, but you could pay anywhere from $400 to $13,700 or more. Your cost will depend on the length, height, and materials for the fence. If you hire a professional installer, labor costs typically represent about half of the total cost of the project. This means you potentially can save quite a bit of money doing the work yourself.

A gate shouldn’t be higher or lower than the fence it's attached to. If the gate is lower than the fence, it encourages strangers to peek at your property. If the gate is higher than the fence, it just looks weird. Gates allow for increased security and aesthetics, so ensure the gate rests at the same height as the fence.