"On time, professional and knowledgable. Could have sold me a top of the line battery but explained to me why a middle of the line for $100 less would be just as good. Keegan will be doing all my generator maintenance from now on. I highly recommend Keegan and Power Cross."
"Ed Riley is extremely knowledgeable about what causes lighting and how to protect from it. He explained to me which and how structures develop static electricity that lead to lighting discharges in a way that the physics made sense to me. They were also reasonably priced and kept their word. Definitely recommend them."
"Great install/product (so far—brand new unit): However, before Blizzard Jan 2025 heard Optimize electrical panel door rattling/“clanking” when I was outside wrapping pipes before blizzard—asked Optimize to check panel door to ensure it’s flush/secure so snow & ice cannot penetrate their electrical box since NEW. Optimize came to check & said there is nothing they can do with loose/rattling panel door, “not to worry”, that no moisture can get to wiring….?? Door is so loose, you barely press the door & it sinks in/a LOT of play. Tech said they have to “allow some air to get inside box”?? Optimize CHARGED me $150.00 to check loose electrical panel door & did not tighten door.. (DEMCO’s generator panel door, installed by Optimize’s electrical panel, is tight/no banging….??). There would be no banging if Optimize panel door was not loose! Once Generator is installed, you have to pay $150.00 for Optimize to come out to check anything you are concerned about with new Unit, post install."
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
"I hired Prime Time Construction to raise the foundation of a 16’ x 20’ prefabricated back yard shed and fill in back yard area with river sand. I first contacted owner Brandon in Oct 2018. Because of schedules government shutdown, and weather it was tough finally getting together to look at my job. I kept calling because of good Home Advisor reviews. Despite a lot of rain and mud Victor and Jose raised the shed and lowered it onto 16” x 16” footer slabs upon which sat standard cinder blocks and termite guards. I had serious low spots in the yard that required 30 cu yd of sand they distributed by wheelbarrow. The whole job took 4 days over most of a week interrupted by rain. They needed to pump out the water that kept accumulating. They reconnected the electricity, adapted and re-fastened the hurricane anchors and installed a plastic lattice skirt to keep animals from underneath. It was a good job under trying circumstances. We bought or made them lunch and I tipped upon completion. Good work requires good treatment. I am quite happy with the outcome."
When it’s time to replace an old or broken pool light, you can hire an electrician near you to get the job done. Working with an electrician is helpful for pool light replacements, especially if you need to repair or update any existing wiring or install new wiring for additional pool lights.
If you have a lamp that flickers or doesn’t stay on, it’s a sign that it’s time to rewire it. Additionally, it’s important to rewire antique lamps so they’re safe to continue using without the risk of an electrical fire. If the plug on your lamp is more than 15 years old or you notice poor performance like flickering, you should hire a lamp repair service to rewire it. If you’re upgrading the bulbs in an antique lamp from incandescent to LED or CFL bulbs, rewire it so it’s compatible with the modern bulbs.
Three-way switches work in pairs, allowing an operator to control a single light or series of lights from two separate switch locations. Most often, a three-way switch controls a light or light series in a single room.
In the case of electrical overflow, an ungrounded outlet should trip the circuit breaker, staving off dangerous scenarios. However, this is not always the case, especially if the wires and circuit breaker are worn down or damaged in some way. Ungrounded wires melt over time as they are introduced to more and more electricity. In other words, a circuit breaker offers protection in most instances but not always, and that’s where the danger lies with ungrounded outlets.
Yes, you can use a dimmer switch with an LED fixture, but it must be a dimmer that is compatible with LEDs. Check the manufacturer’s information to ensure the dimmer works with LEDs, as not all dimmers are compatible with them. Many smart light switches accept LEDs, but be sure to read the details on the packaging.
The Kentwood, LA homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Whether you’re shopping for a new home or simply doing a safety check on your current place, learn what factors influence an electrical inspection cost.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
