Best plumbers near Hayes, LA

Main water shut-off valves last 10 to 20 years on average, though they can sometimes last longer. This depends in part on the material you choose. Brass valves are very durable, but more expensive bronze or stainless steel valves may last even longer. Main water shut-off valves often fail due to aging internal parts, such as rubber washers. However, corrosion and sediment buildup also contribute to valve failure. If purchasing a home at least 10 years old, you may want to replace the main water shut-off valve soon to avoid potential problems.

A shower cartridge is a component located inside the shower valve. While the terms are sometimes used interchangeably, they are two different parts. The shower valve is the entire device that regulates the flow and temperature of water in your shower. The cartridge is the inner part of the valve that connects to the shower controls, allowing you to adjust the water's temperature and flow by balancing the mix of hot and cold water. While the signs of a failing valve and cartridge can be similar, if you are experiencing issues with water temperature, you may need to replace the entire valve.

There are few things more annoying than trying to fall asleep only to be woken up by the sound of a dripping faucet. If the faucet drips when the water is off, it probably has a loose or damaged seat washer. The screw gets loose from repeated use, making the faucet drip. With outdoor faucets, this is more common in the summer when people are using it more often to water the garden or cool off. Disassembling the faucet and tightening or replacing the seat washer and screw can get the dripping to stop.

Yes, you can fit a vanity unit to an existing sink, especially if you plan to custom-build the vanity. With a prefabricated vanity, you’ll likely need to make a few adjustments. It depends on the type of sink, the size of the sink, and the existing plumbing. If you plan to retrofit a sink into a prefabricated vanity, make sure you take precise measurements and that your sink is compatible with the vanity you select. Prefabricated units have a precut sink hole, so you’ll need the size to match your sink.