Get matched with top fence painters in Cheneyville, LA

You should wait three to six months after you buy it to paint pressure-treated wood. It needs time to dry from the chemicals applied to it. The paint will not adhere to the treated wood as well if it’s still wet from chemicals. To test the wooden boards, drip water onto them. If the wood absorbs the water, it’s ready for painting. If the water beads up, it’s not dry enough to paint yet. You can build your deck or fence while the treated wood is still wet, but you’ll need to paint it later.

Staining or sealing a cedar deck will help it last longer. Cedar may be tough by nature, but without protection, it can still fall victim to moisture, sun exposure, and mildew over time. Applying a stain, sealer, or both creates a shield against the elements, helping preserve the wood’s strength and appearance.

Generally, these steps are included in exterior house painting:

• Prepping and protecting the areas not being painted

• Scraping away loose paint

• Cleaning off dirt, grease, and debris

• Caulking gaps and openings

• Priming with a quality paint primer

• Painting the prepared areas, including trim and accents with chosen paint finish

• Adding a second coat

• Cleaning up the site and disposing of tape, plastic, and drop cloths

Moisture and rot are the largest threat to wooden fences. Stain can help your wood fence last 15 to 20 years, but only if you choose a stain with waterproofing qualities or add a sealant. Oil-based stains create a thicker moisture barrier than water-based stains, though both are mold and mildew resistant. You’ll generally need to re-stain your fence every one to eight years to get full protection.