Get matched with top sink installation pros in Thayer, KS

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

Any drain in your house requires a water trap to prevent sewer gases from entering the home. Dishwashers don’t have an internal water trap, so they must use an external P trap. The most convenient P trap for the dishwasher is already in the plumbing under your sink.

The biggest sign that your flange leaks is if you notice water at the base of the toilet. The cause is likely due to a poor flange installation, so you might have issues with loose bolts, an uneven flange, or a cracked plastic flange. Add a deteriorating wax seal to this, and you have a recipe for disaster. The best solution is to shut off the water valve, replace the toilet flange, and seal it with a new wax ring.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.