Get matched with top sink installation pros in Caney, KS

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

Older faucet fixtures may have some corrosion, leaving them stuck. Try a few techniques to loosen the fixtures.

• Wrap the fixture with a towel and tap the base with a hammer.

• Use a putty knife to gently remove any caulk that may be holding the handle or fixture in place.

• Apply a few drops of penetrating oil around the base of the fixture or around the nuts.

• Purchase a faucet pulling tool to pop the fixture loose.

Silicone caulk—despite having some adhesive properties—is not the primary thing that holds your sink in place. Rather, it seals the gaps around the sink to prevent water from leaking and causing issues with mold and corrosion. Most sinks are secured by clips, though some sinks are secured with two-part epoxy or brackets.

Installation typically takes 1-3 days, while repairs can be completed in a few hours to a day.