Get matched with top drywall pros in Lyons, KS

Drywall mud should be left to dry for at least 24 hours before sanding, though drying time depends on the thickness of the application, humidity, and room temperature. Thicker layers or projects done in high humidity may require 48 hours or more of drying time. You’ll know the mud is ready when it feels completely dry and appears light in color throughout. Sanding too early can cause smudging or gouges, so patience is key for a smooth, professional-looking finish.

You should stagger drywall sheets to help prevent cracking. The joints between drywall sheets are the weak spots, so if you install drywall with seams aligned, you’ll create weak lines that run across the length of the wall and extend from floor to ceiling. But when you stagger drywall, the solid sections of panels will support the joints. This can prevent seams from cracking or separating due to fluctuating temperature and humidity, vibrations from movement inside the home, and gravity.

You can drywall over plaster, but there are some things to consider. First, installing drywall over plaster will increase the wall’s thickness. This could create challenges for window and door frames that no longer fit the wall’s thickness. You may also have to adjust power outlets so they are accessible. When done right, drywall can create a smooth, flat appearance, but it’s best when handled by professionals.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.