Get matched with top sink installation pros in Burden, KS

Yes, you can fit a vanity unit to an existing sink, especially if you plan to custom-build the vanity. With a prefabricated vanity, you’ll likely need to make a few adjustments. It depends on the type of sink, the size of the sink, and the existing plumbing. If you plan to retrofit a sink into a prefabricated vanity, make sure you take precise measurements and that your sink is compatible with the vanity you select. Prefabricated units have a precut sink hole, so you’ll need the size to match your sink.

A good option for opening up and cleaning a sink drain is to use a ¼ cup of baking soda and 1 cup of white vinegar, along with a rubber stopper to cover the drain while those materials work their magic. After about 15 minutes, you can flush the drain with hot water. In many cases, these materials can scrub out minor clogs and get the drain working properly again. If the issue persists, call in a plumber near you to get the problem permanently fixed.

The Thanksgiving holiday period is one of the busiest times of the year for plumbers. Both Thanksgiving Day and the day after, often called Black Friday or "Brown Friday" by plumbing professionals, see a significant increase in service requests. This is because a house full of guests, large holiday meals, and unfamiliarity with the home's plumbing can lead to clogged drains, garbage disposal issues, and sewer line backups. Outside of the holidays, the busiest weekdays for plumbers are typically Monday and Tuesday, as many people discover plumbing problems over the weekend but wait to call for service. Despite the holiday, you can rest assured that many plumbers work on Thanksgiving and Black Friday to handle the surge in emergency calls.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.