"Contractor provided outstanding communication via email. If there was a change in schedule, we were informed in ample time. Service was exactly as expected. Kenny completed follow-up details by inspecing our property to make sure no nails were dropped on ground. This is a highly capable, pleasant and professional individual who performed all the right tasks in an impeccable manner. We will certainly contact this company in the future if we have roofing problems."
"I hired him for a crawlspace inspection yet I had a few other questions about areas of my home and he took time to listen and answer each one with patience and understanding. Really cares about the well-being of a home and the people that live there."
"I had several bids from different companies and a fairly restrictive time frame. Vantage Point Exteriors was able to meet that time frame. Originally, I was only going to repaint and replace the roof and ended up getting everything taken care of instead once it became clear that for just a bit more I could get it all taken care of at one time. My home looks great and I do not have to worry about these items for a long awhile. "
We are primarily a residential roofing company. We are very experienced in any exterior home repairs or improvements. I currently only have one in house crew. I like to concentrate on one job at a time.
We provide residential and commercial solar power options, and provide support services for industry partner companies. We offer no cost consultations and $0 down financing. Please contact our office for a consultation at (931)922-8258.
"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
The most common slope range for roofs on houses in snowy areas is between 4/12 and 6/12, or 50%. A roof with a slope of less than 10%, or roughly a 2/12 pitch, won’t be effective at shedding snow. However, roofs that are too steep can allow large amounts of snow to build up and fall all at once, creating a hazard for those on the ground.
The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:
Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.
Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.
Sticky shoes help, but you shouldn't be walking on the steel roof— let the pros do that. it's dangerous enough to walk on asphalt shingled roofs which have quite a bit of texture. Stone coating adds a lot of grip, but it still doesn't lock your foot down, so if you absolutely have to be on the roof, make sure you’re secured in another way, like with the harness and rope.
Gable vents are more common in older homes built before the 1970s. Homes built after this era use ridge vents or soffits, but you can sometimes find homes with both gable and ridge vents. Gable vents can have a purely aesthetic purpose, while ridge vents hide in the roof shingles so air can flow under the roof while keeping the attic dry.
While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.
The Ashland, KS homeowners’ guide to roofing services
From average costs to expert advice, get all the answers you need to get your job done.
A new roof improves curb appeal, increases home value and keeps your living space protected from the elements. Learn about average roof replacement costs to set your budget.
Building a roof is a serious but rewarding project. If you're up to the task, use this step-by-step guide to learn how to build a roof without the help of a contractor.
Roof leaks are an emergency, so knowing who can tarp your roof quickly and correctly can save you from major water damage if you ever experience a leak.
