Get matched with top flooring contractors in Wakarusa, IN

Door transitions can work with virtually any flooring type; however, different transition strips lend themselves better to specific flooring types. For instance, if you are bridging the gap between a taller floor, like carpet, to a shorter floor, like hardwood, then you will want a transition strip with a slight slope to bridge the height difference. These transition strips are called reducer molding. On the other hand, if you are bridging two floors of the same height, you can use flat transition strips, such as T-strips and seam binders.

If you also need to know how to fill the gap between the floor and the baseboard, it's best to use a flexible, paintable latex caulk. Clean the area thoroughly to remove dust and debris. Then, apply a smooth bead of caulk along the gap using a caulking gun, and use a caulk-smoothing tool to press and smooth it into place. If the gap is large, you may need to insert backer rod, such as a foam filler, before caulking. Once dry, paint the caulk to match the baseboard for a clean, seamless look.

Because concrete is porous, installing flooring directly onto the surface is not a good idea. Any moisture within the concrete due to atmospheric conditions or seasonal humidity can seep into your flooring, causing warping or damage. In most cases, you’ll need to install at least a moisture barrier between the concrete and the flooring you choose.

No, everything doesn’t get wet if the bathroom is well-designed and the fixtures are properly installed. It’s important that the floor of a wet room drains correctly, and proper waterproofing and slip-resistant flooring are used to avoid creating slipping hazards. Since the shower isn’t housed in an enclosed space, you’ll need to make sure the towel rack and toilet paper holder are placed in areas where they won’t get wet.