Get matched with top insulation pros in Crawfordsville, IN

On average, insulating an attic costs about $2,500, with a typical range of $1,500 to $3,500. The final price often depends on the attic's size, with costs generally falling between $1 to $3 per square foot. For example, insulating a 1,800-square-foot attic would likely cost between $1,800 and $5,400.

If the project involves removing old insulation, this can add an average of $900 to the total cost, bringing a full removal and reinsulation project to around $3,000.

Several factors influence the overall cost:

• Insulation Type: Prices per square foot vary significantly by material.

• Reflective: $0.50–$1.50

• Blown-in: $1–$4

• Batt: $2–$4

• Loose-fill: $2–$5

• Spray foam: $2–$5

• Structural insulated panels (SIPs): $4–$7

• Project Complexity: Factors like sealing air leaks, poor attic accessibility, and required inspections can add to the cost.

• Removal Issues: The discovery of mold, asbestos, or pests during the removal of old insulation can substantially increase the price.

Yes, it is possible to have too much insulation, which can have detrimental effects. While more insulation might seem better for energy efficiency, a home needs to "breathe" or ventilate to release moisture that accumulates inside. Over-insulating can seal a house too tightly, trapping water vapor and leading to several problems, including mold, mildew, and condensation. Homes in warm, humid climates are particularly susceptible to mold, while those in colder climates can experience condensation from temperature fluctuations. Additionally, adding more insulation than the recommended amount for your climate may not provide recoverable energy savings. To avoid these issues, consult a professional insulation contractor who can determine the optimal amount of insulation for your home.

If you need to insulate behind finished walls, the best option will likely be to have an insulation professional install blown-in insulation. The installation requires small holes cut in your wall, after which the installer can blow loose-fill insulation into the void. After the installation, you’ll have minor drywall patching, which shouldn’t cost more than $100. Compared to ripping down the existing drywall, using a different type of insulation, and replacing and finishing the drywall, this should save you hundreds or even thousands, depending on the size of the room you’re insulating.

A vapor barrier can last over 20 years, but they are vulnerable to pests, flooding, and other natural disasters. If your home weathers a storm or is treated for any pest infestation, make sure to have a drywall pro come check the integrity of your vapor barrier. It’s also important to have a pro install a vapor barrier since improper installation can lead to tears or leaks in the barrier that shorten its lifespan.