Top-rated pressure washers.

Get matched with top pressure washers in Walnut, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your pressure washing project in Walnut, IL?

Select your specific project to find the pro for you.

Find Pressure washers in Walnut

Avatar for Chris Miller Contracting LLC
Chris Miller Contracting LLC
4.8(
6
)
Exterior Surfaces - Powerwashing

Serving Walnut, IL and surrounding areas

Approved

In business since 2024

Free estimates

Offers commercial services

"I am pleased to refer Chris Miller for any home painting project, from simple to detailed, that you may be considering. Chris painted my villa condo's large deck, railing, and pergola with excellent preparation and skill. He left the site tidy while work was in progress and cleaned up after himself when the job was completed. I was very pleased with the results of Chris's work and hired him to come back a few weeks later to do a few other small painting projects for me. Based on my experience, I would highly recommend Chris Miller Contracting LLC to anyone looking for a friendly professional painter. tidy while the work was in progress and made sure to clean up after the job was completed. I was very pleased with the results of Chris's work and hired him to come back a few weeks later to do a few other small painting projects for me. I would highly recommend Chris Miller Contracting LLC to anyone looking for a friendly professional painter."
project photos
project photos
Drywall finishing
Avatar for Life Cycle Cleaning
Life Cycle Cleaning
5.0(
18
)
Exterior Surfaces - PowerwashingExterior Surfaces - Powerwashing - For Business

Serving Walnut, IL and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"Life Cycle Cleaning did such an amazing job!! My boyfriend and I are moving into our first house this weekend and a family member was so sweet to gift us a service! It’s going to be so nice to unpack everything now that the kitchen cabinets and everything is clean! They made sure to ask which room I’d like for them to focus on the most (bathroom). And after they were done they made sure to do a walk through with me! I couldn’t recommend them enough! Thanks guys!! - Allison"
Floor Polishing
Shampoo Area
Bathroom Cleaning
Deep clean
Weekly Cleaning

+4

Response time3 hrs
Recommended by5%of homeowners
Avatar for Elite Seamless Gutters, Inc.
Elite Seamless Gutters, Inc.
4.9(
24
)
Exterior Surfaces - PowerwashingExterior Surfaces - Powerwashing - For Business

Serving Walnut, IL and surrounding areas

In business since 2000

Free estimates

Warranties offered

"Elite Seamless Gutters, in Spring Valley, Illinois for the second time has worked on my home in Princeton, IL. In 2014 Elite Seamless Gutters installed gutters and down spouts on the house. Because this project was done perfectly and the staff were very professional, Monday, April 15, 2019, Elite Seamless Gutters worked on my front porch roof which had not been flashed properly by another company. Therefore, causing lots of water damage. The crew made sure I understood what they were doing and if I had any questions just let them know. The crew explained to me what they do and explained the material function. The repair took two long days. The second day the roof was completed. The crew installed gutters and down spouts on the porch. It was explained where the down spouts need to be installed. The crew placed two down spouts, in front of the east and north columns. This did not take away from the look of my home. I was very pleased with the work and interacting with Elite Seamless Gutters and their crew. Each day the crew cleaned up the job site. They went that extra mile with the gutter and down spouts."
Siding
Hotsy Pressure Washer
Front of House - After
Machine
Front of house - Before

+27

Response time2 days
Recommended by100%of homeowners
Showing 1-10 of 38
Pressure Washing questions, answered by experts

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

While DIY power washing is possible, professional services ensure thorough cleaning, proper pressure levels, and avoidance of surface damage.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

This answer is a bit tricky because experts say both. You should apply your cleaning solution from bottom to top, but rinse from top to bottom to avoid streaking. When it comes to multi-story houses, you’ll want to start at the top floor and work your way down, but follow the above instructions for each level as if it were an independent structure, rather than washing the whole house as one unit.

Yes, you can safely pressure wash vinyl siding. As a durable material, vinyl can typically withstand pressure up to 3,000 PSI, holding up better than other siding types like aluminum or stucco. However, it's crucial to operate the pressure washer correctly to avoid damage. Before you begin, repair any existing cracks or damage to the siding. For a safe setup, use a 15- or 25-degree nozzle and maintain a distance of at least three feet from the siding to prevent splashback and damage.

The Walnut, IL homeowners’ guide to pressure washing services

From average costs to expert advice, get all the answers you need to get your job done.