Get matched with top roofers in Newark, IL

Roofing estimates and inspections are not the same thing. Roofing inspections (whether done with a drone or by the traditional method) help you find any damage or defects on a roof. You will pay a set fee for a roofing inspection and use it to get certification or to determine whether repair or replacement is necessary. Beware of unsolicited contractors coming to your home and offering a so-called free roof inspection—these are often scams.

Roofing estimates, on the other hand, are typically free and offered by a roofing company hoping to earn your business. Some roofing estimates are performed with drones, while other companies will still opt to send people up onto the roof. Either way, the estimate is for roof repair or replacement costs the company wants you to hire them for.

The minimum recommended slope for a porch roof is 1/4:12, which means 1/4-inch of rise every 12 inches of run. Slopes of 3:12 and 4:12 are more common and provide faster drainage for runoff. Make sure to choose a pitch that’s appropriate both for the climate in your area and the type of roof material you install. Hire a roofer if you need help determining what the right roof pitch is.

The green coloration that develops on copper roofs is called a “patina,” and it’s a result of mild oxidation on the surface. The oxidation process is not harmful to your roof. In fact, the surface corrosion acts as a protective layer and won’t spread to the core of your copper roof materials. The discoloration will progress much more quickly in damp or humid climates than it will in dry climates. If you don’t like the green color, you can seal your roof to preserve the shiny, rose-gold look.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.