Get matched with top roofers in Kirkland, IL

You should tarp a roof whenever roof damage occurs. Missing shingles and holes in your roof can cause roof leaks and problems that come with them. Tarping is a quick way to provide temporary roof protection while you wait for a professional roofer to make repairs.

It’s possible for a roofing estimate to change after the initial assessment, but in most cases, it shouldn’t. There’s always the risk that something unexpected will happen that causes prices to go up, like discontinued materials or your roofer discovering previously hidden damage to your decking when ripping off the old roof. However, experienced roofers should account for these circumstances in their initial estimates. Roofing contracts are binding, so always check your contract for language about how and why your numbers could change.

Generally, hailstones that are one inch in diameter or larger can cause significant damage to a roof. However, smaller hail can also cause damage, particularly when accompanied by strong winds, if it strikes an aging or poorly maintained roof, or if hailstorms are frequent in your area. Hail that is ¼ inch (pea-sized) or smaller poses a minimal risk of immediate, permanent damage, but cumulative impacts can cause deterioration over time. The extent of the damage also depends on the roofing material; hail-resistant tiles like slate or certain types of asphalt shingles can withstand impacts better than other materials. If you are concerned about potential damage after a storm, it is always a good idea to have a professional roofer conduct an inspection.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.