Get matched with top door pros in Ucon, ID

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Screen doors (sometimes called barrier doors) and security doors serve different primary functions. A screen door's main purpose is to allow airflow and keep pests out, featuring a lightweight frame and a mesh screen. A security door, however, is a heavy-duty structure designed to prevent unauthorized entry. Security doors are installed with permanent screws into the home's walls and are often equipped with deadbolts or other heavy-duty locking mechanisms for enhanced protection against intruders.

You should generally cut between 1/8-inch and 1 inch when planing a door. If you cut off more than that, you risk damaging the door. Planing too much from the bottom of your door can cause noticeable gaps, so it’s always better to start with as thin of a section as possible and work in thin layers until your door no longer sticks.

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.