Get matched with top woodworkers in Centerville, ID

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: What shouldn't you do with butcher block countertops?

• <div><p>There are several mistakes you should avoid when using butcher block countertops. Don't place hot pots or pans directly on the surface, as this can crack the wood and cause permanent damage. Avoid leaving wet items sitting on the surface, and wipe up liquids as soon as possible to avoid stains. </p></div>

Q: How long will landscape timbers last in the ground?

• <div><p>Landscape timbers can last <b>10 to 20 years</b> in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.</p></div>

Q: Can I cope crown molding with an angle grinder?

• <div><p>If you don&rsquo;t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You&rsquo;ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding. </p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Centerville, ID?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Centerville, ID

*The Angi rating for Woodworking companies in Centerville, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Centerville, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on February 28, 2025

Find Woodworkers in Centerville

Castleberry Carpentry

4.5(

)

Interior Trim and Decorative Moldings - Install

Serving Centerville, ID and surrounding areas

Approved

In business since 2013

Free estimates

Customers say: Quick response

"Shane and Corey did an excellent job with the finish carpentry on a basement remodel. They matched the custom redwood trim & stayed within the original design, adding modern updates that blended well aesthetically. They are master craftsmen, and have creative minds that are up for new challenges which I tested them with. Thank you for quality craftsmanship to you both!"

+27

Response time2 days

Recommended by95%of homeowners

Request Quote

Ascend Construction LLC

5.0(

)

Carpentry Framing - Repair

Serving Centerville, ID and surrounding areas

Approved

In business since 2022

Free estimates

Warranties offered

"Professional Punctual Quality Work Authentic Honest Great guy who does great work."

Response time1 day

Response rate86%

Recommended by80%of homeowners

Furniture - Build Custom

Serving Centerville, ID and surrounding areas

Approved

Small jobs welcome

"Joe was communicative from the jump, willing to come back when during his first visit we discovered items had arrived damaged, was prompt in arrival times, efficient and cleaned up when he was finished, leaving no trace. Highly recommend!"

8 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Centerville, ID and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

23 neighbors recently requested a quote

Carpentry Framing - RepairFurniture - Build CustomGazebo or Freestanding Porch - Repair+4 more

Serving Centerville, ID and surrounding areas

Approved

Emergency services offered

Small jobs welcome

Offers commercial services

"Jeremy was fantastic. Extremely professional, knowledgeable. He installed our Schlage keyless door locks, hung our tv's and also hooks for coats in laundry room. He came prepared with all tools and everything he did was top notch perfect. We will ask Jeremy again for his services. I would recommend him to anyone as he has a wide range of experience for any home tasks or needs. Thanks again Jeremy!!!!! You were great."

4 neighbors recently requested a quote

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Centerville, ID and surrounding areas

Approved

In business since 1995

Free estimates

Credit card accepted

At One Landscape, we pride ourselves on our expertise in creating beautiful, sustainable landscapes. Our mission is to deliver top-quality workmanship and ensure complete customer satisfaction from design to completion.\n\nWe work closely with each client, providing clear communication and professional guidance throughout the process. Our reputation is built on delivering exceptional landscaping services with a focus on safety, quality, and attention to detail.

9 neighbors recently requested a quote

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Centerville, ID and surrounding areas

Approved

In business since 1995

Free estimates

Warranties offered

"Blake with One Grounds Management was great. He responded quickly with my request in Angi for irrigation and landscaping for a new construction home. A comprehensive on-site inspection and estimate was accomplished. The work was completed with quality products and a detail oriented hardworking crew. I would highly recommend Ones Ground Management for any of your home landscaping needs."

Response time2 days

Response rate99%

45 neighbors recently requested a quote

Request Quote

Integrity Handyman Services

New to Angi

Furniture - Build Custom

Serving Centerville, ID and surrounding areas

Approved

Credit card accepted

Hello!\nI'm Bryan and I'm a homeowner myself. In my 24 years of homeownership, I have learned a lot of skills to fix, build and repair around the house. I'm happy to help. \nI am a man of character though, and prefer not to be alone with a woman as to avoid anything that could look bad or be misunderstood. I appreciate your respect on this and hope to be able to help you with your project!

13 neighbors recently requested a quote

Request Quote

Budster consulting LLC

New to Angi

Furniture - Build Custom

Serving Centerville, ID and surrounding areas

Approved

Here at Budster Consulting LLC we listen to your needs and wants

43 neighbors recently requested a quote

Request Quote

Northwest Built LLC

New to Angi

Interior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - RepairWood Stairs and Railings - Install or Replace+1 more

Serving Centerville, ID and surrounding areas

Approved

In business since 2013

Free estimates

Offers commercial services

Northwest Built LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business.\n

Request Quote

...

Showing 1-10 of 99

Woodworking questions, answered by experts

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

There are several mistakes you should avoid when using butcher block countertops. Don't place hot pots or pans directly on the surface, as this can crack the wood and cause permanent damage. Avoid leaving wet items sitting on the surface, and wipe up liquids as soon as possible to avoid stains.

Landscape timbers can last 10 to 20 years in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Centerville, ID homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.