Get matched with top locksmiths in Wayland, IA

Over time, latch components may wear out or get grimy, leading to this problem. First, check for dirt, dust, or debris in the latch mechanism to ensure smooth operation. Use an aerosol duster and lubricant to clean and loosen. You may also need to tighten the screws in the component, adjust the strike plate, or replace the lock. If none of these steps resolve the problem, consult a professional locksmith.

It could be difficult to get in and out of a lock for several reasons, such as the keyhole needing additional lubrication. Particles, debris, and dirt can also get into a lock, making a key stuck (the lubrication can help with the removal). 

Newer, electric-powered door locks generally have a life span of five years or less. That’s thanks, in large part, to a phenomenon called planned obsolescence, in which products are programmed to need replacing after a certain amount of time. That’s also why older, manual, push-key locksets can last up to 30 years with regular cleanings and maintenance. When it does come time for a new set-up, know that the cost to change locks ranges from $130 to $500 on average.

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.