Top-rated stucco pros.

Get matched with top stucco pros in Waverly, IA

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Waverly, IA?

Select your specific project to find the pro for you.

Find Stucco pros in Waverly

Stucco questions, answered by experts

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

Stucco will dry in two to three days, but you should wait one to two months to allow it to cure fully before you paint it. The curing process is slow, but leaving the material exposed to air and natural moisture will help it reach its maximum strength. If you live in a hot, arid climate, wait a month before painting. Wait two months before painting if you live in a more moderate or wet climate.

The best way to assess that your stucco needs repair is to inspect it, both visually and physically. If you notice cracks, chips, or staining, that’s a good indication that your stucco could use some TLC by a professional. Additionally, if you touch an area that feels soft and has a little “give,” you should consider repairing it as soon as possible to avoid further damage, both to additional stucco spots and to your home’s structure. 

You should aim to let stucco dry for at least 48 hours before it rains. While misting new stucco and keeping it moderately moist is important for strength and longevity, uncontrolled exposure to rain can lead to weak stucco that doesn’t bond properly. Rain can also affect the stucco finish and the color unevenly, leaving you with less appealing siding.

You can use small bits that are up to 3/8 inch in diameter, or larger bits that are 1/2 inch or more in diameter. Make sure the bits you use are coated with carbide or diamond; this information is usually visible on the package. You can also use hole saw bits to drill into stucco.

The Waverly, IA homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.