Get matched with top roofers in Walnut, IA

Most Cape Cod houses are two stories tall at the peak, although they’re considered one-and-a-half stories tall because the steep roof pitch cuts off a portion of the living space on the second story. Unless you raise the roof on your Cape Cod house to add a dormer, the interior rooms upstairs will lose some usable living space to the sloped ceilings.

While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.

Generally, hailstones that are one inch in diameter or larger can cause significant damage to a roof. However, smaller hail can also cause damage, particularly when accompanied by strong winds, if it strikes an aging or poorly maintained roof, or if hailstorms are frequent in your area. Hail that is ¼ inch (pea-sized) or smaller poses a minimal risk of immediate, permanent damage, but cumulative impacts can cause deterioration over time. The extent of the damage also depends on the roofing material; hail-resistant tiles like slate or certain types of asphalt shingles can withstand impacts better than other materials. If you are concerned about potential damage after a storm, it is always a good idea to have a professional roofer conduct an inspection.

It’s possible to walk on a clay tile roof, but you run the risk of breaking or cracking the tiles if you’re not careful, so it’s best not to walk on it if you can avoid it. If you or a contractor needs roof access, be sure to distribute your weight evenly and step on the portions of tile that are also supported underneath, which depends on your tile design. Walking on any roofing material is inherently dangerous, so wear rubber-soled shoes and use safety equipment if you need to access your roof.