Get matched with top asbestos removal specialists in Colo, IA

The EPA broadly defines hazardous waste as any waste that could pose a danger to humans or the environment. More specifically, it includes any material that could combust or explode under normal temperatures and pressure, as well as materials that are toxic or corrosive. Some common household hazardous waste products include aerosol cans, paint cans, old tires, medical supplies, unused medications, fire extinguishers, cleaning solutions, and lawn care products.

While there are some sealants designed to be spray-painted over asbestos to encapsulate it, you still want to make sure it’s a specifically designed product for this purpose—not just run-of-the-mill spray paint. Furthermore, be sure you aren’t inadvertently spraying the asbestos fibers around when you take on this project, and as always, be sure to wear the proper protective gear, including a P-100-rated respirator and a disposable body suit, so as not to inadvertently breathe in or spread asbestos fibers.

In most cases, homeowners insurance doesn't cover asbestos abatement. Insurance policies frequently exclude coverage for pollutants, contaminants, and hazardous materials, which include asbestos. It's considered a pre-existing condition in homes built before its ban, so removal is seen as a maintenance expense rather than an insurable loss. There may be an exception if the asbestos-containing materials are disturbed due to a covered event, such as fire or storm damage. Some policies may cover the abatement as a part of those repairs.

Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.