Get matched with top interior painters in Oglethorpe, GA

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

Penetrating sealer seeps into concrete pores to protect it from moisture and staining, cracking, and mold caused by water. This means you cannot remove penetrating sealers like topical sealers. The good news is that penetrating sealant doesn’t have to be removed before resealing, as most topical sealers must. Instead, you’ll want to buy a compatible penetrating sealant (often the same kind already in the concrete) and apply it. Always follow the manufacturer’s instructions.

Scrape softened caulk with a putty knife or slice hardened caulk with a utility knife. Hard-to-remove caulk generally requires more time exposed to a softening solution, like a commercial product or rubbing alcohol. A few hours to a day later, the softened caulk will come off with the help of common household tools. In many cases, you can grab needle-nosed pliers for caulk with multiple old layers and pull the material off its base. 

Yes, WD-40 can be used to remove dried paint, including spray paint, from surfaces like metal because it acts as a solvent. To use this method, spray enough WD-40 to completely cover the paint and let it sit for five to ten minutes. Afterward, gently scrub the area with a cloth to remove the paint. Be aware that this method might leave behind a greasy film that can attract dirt.