Get matched with top countertop and backsplash pros in Gordon, GA

The best tool for cutting countertops depends on the type of countertop material. For some softer materials, like laminate (Formica) and butcher block, you can use a hand saw, but most experts recommend power saws like circular saws, since these make the job go faster and easier and give more even results. However, power saws and circular saws are dangerous if used incorrectly, and they can be so powerful that they damage or chip laminate, stone, and other types of countertops. For this reason, you should take safety precautions and use best practices to prevent damage.

Solid surface countertops are fairly resilient. You can use soapy water or ammonia-based cleaners. You can also occasionally use diluted bleach (around 5 tablespoons per gallon of water) for sanitization. Avoid window cleaners because they leave a waxy film that can dull the countertop’s surface. Solid surface material is nonporous, so there’s no need for sealing.

Durable, contemporary concrete countertops can increase home values. However, they might not offer as high an ROI as quartz or granite surfaces, which offer a timeless aesthetic and durability likely to appeal to a range of home buyers. Installing new countertops is a home improvement that can yield an average of 60% to 80% ROI when done well, using quality, perennially popular materials.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.