Get matched with top percolation testing pros in Claxton, GA

If you can locate building records, you may be able simply to see what type of tiles (or bonding agent) was used. Any flooring made between 1950 and 1989 more than likely contains asbestos. Asbestos tiles can also be slightly thicker than other tiles and often measure 9” x 9”, 12” x 12”, and 18” x 18. Black mastic was a commonly used adhesive that contains asbestos.

No, but it’s common that they do. Gravity furnaces weren’t terribly efficient so wrapping either the ductwork in asbestos, the furnace itself, or both, was something done regularly. This allowed the system to retain more heat. At the time, this greatly enhanced the efficiency of the furnaces but it wasn’t until later that we became aware of just how carcinogenic and dangerous asbestos could be.

Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.

Professional asbestos testers or environmental consultants are the best people to call to test for asbestos. An asbestos testing company specializes in collecting and analyzing samples and will be the most qualified to do the job for you. An environmental consultant may not specialize in handling asbestos, but should still have the knowledge and know-how to safely collect a sample and send it off for analysis.