Get matched with top electricians in Hollywood, FL

There are several things to try to repair a broken outlet. Whether it's fixable or not may depend on the problem and the type of outlet itself. Start by testing the circuit with an electrical tester and ensuring the breaker switch to the circuit functions as it should. Loose wires are sometimes the culprit and are repairable by fixing the connections. 

A gas stove doesn't always need a dedicated circuit. Unlike an electric range, which uses 240 volts and requires a 240-volt receptacle, a gas stove only uses 120 volts. In some cases, your electrician will need to replace the existing two-pole circuit breaker with a single-pole circuit breaker as well as swap out the existing 240-volt receptacle with a 120-volt replacement.

Electrical fixes are best handled by a licensed electrician, but it’s possible to release a wire connection on your own. Be sure to always turn off the power to the outlet at the circuit breaker before beginning your project to avoid electric shock. Carefully insert the tip of a flat screwdriver into the rectangular hole beneath the wire. Hold the outlet in the palm of your other hand. Pull out the wire as you apply pressure with the screwdriver.

Outdoor outlets should be at least 15-amp, but preferably 20-amp. The exact rating will depend on the electrical load of the devices that will be plugged into the outlet and the capacity of the circuit. It's important not to overload the circuit, which can cause safety hazards such as tripped breakers or electrical fires. In general, a circuit rated for at least 20 amps is recommended for outdoor outlets, while each outlet should be rated for at least 15 amps.