Get matched with top drain cleaners in Amston, CT

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If methods like hot water or a plunger don’t work on your clogged drain, you can snake your drain to dislodge the plug. This can be a messy process, taking some physical effort and additional time over the other drain-clearing options. You can purchase a drain snake at a hardware store and choose from handheld options or those attached to a drill. Just work slowly, and be ready to call a plumber if you’re unable to reach the clog from your drain or P-trap.

Once you’ve poured the baking soda and vinegar into a drain, you should wait about 10 minutes for the mixture to break down the clog. If you try the baking soda and vinegar method and it doesn't work, you can do it again or try the baking soda and salt trick.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500