Get matched with top carpenters in San Miguel, CO

"Mr Ross, did a great job on our patio door. He had to deal with harsh mountain weather; dealing with mt. snows and windy conditions. I could never figure out the cost of the door though. I would definataly recommend him."

"Pat and Lucas got the job done quickly and it looks beautiful. They were ahead of schedule to get the deck built for us and they were precise with the deck design we discussed! It is the perfect place to be and we will enjoy it for many years:) Thanks Pat"

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"Luke was a gift! I moved from Colorado into a new home in Prattville, walked in the door and immediately realized I couldn’t live with the existing DIY paint job. I called Luke’s Painting, their estimate was $1400.00 less than their competitors, he started painting two days later. Luke was professional, honest, hard working and always cognizant of the fact that I was working from home while he was painting. The finished product is amazing, a realtor commented on how clean the lines are. I couldn’t be happier. Thank you Luke’s Painting!"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"had purchased this on a Deal. I moved my office to the in-law suite, and wanted something outside my norm - yet not too jarring. The decoraator is in Mass. We communicated via email, Pinterest., Houzz, their website and phone conference. I planned to reuse my light cherry office furniture, but needed to get rid of the white wall look. I sent photos of the room and a floor plan. I answered their online style questionaire and sent photo of the furnishing, my favorite Arts n Crafys desktop lamp and some of the art work I wanted to use. The result was a vibrant palate that is invigorating and joyful to work in. Using the colors from some paintings I collected in Africa15 years ago and my electric taste. the result was very bold. (Formerly my definition of bold was any color other than white or beige. The cair rail and lower walls are a terracotta with a rich deep gold on top. The remaining woodwork and doors are a dark slate gray with a satin finish. (Really - no white glossy woodwork.) I feel like I am in some exotic place when I work. I have met with other designers in the past. They ask your likes, then tell you what think regardless. Not so here, the process was interactive, two sided and balanced. The results are stunnung. I wouldn't hesitate to use them again, even if no big deal is available.
"

"Mariano was very professional and did an excellent job. He was hired for the concrete slab for the foundation for our home and we asked him to return to do the drywall on a separate building we built. Both projects turned out excellent and we plan on using this company for any future projects."

"The technician came within the time frame I was given. He was very professional and respectful of my home."

The team at Above All Window Cleaning And Services, strive to exceed the expectations of each and every customer. They do that by their professionalism, offering affordable prices and packages for every budget, and they use the highest quality products available, that are kid and pet friendly. Their attention to detail is above all others, you’ll notice the difference immediately upon the service your home

"This was the service provided by AHS's contractor Myers Comfort Specialist.  They would only provide a 2hr window with a 30 min notice of when they would be there. They agreed to come out between 3pm - 5pm that day; later around 4:30 I call to see when they would be out and discovered the tech had call the wrong number and they couldn't come out until the next day. The tech came out and diagnosed the problem, but he need a part. Later that day, when I called to inquire about a time frame I was told by a supervisor that the technicians do not turn in paperwork until the next morning and then the part would be ordered. I received a call the next day that the part was available, but they could only come out between 1pm and 5pm with a 30 min notice. I ask to schedule the first appointment for the next day and was told they would set up a time to be out between 8am - 10 am with a 30 min notice. At 10am the next morning, no call, no show. I called MCS and was told the technician was delayed at the warehouse picking up the part and would call shortly. (I'm not sure why the part was not picked up the day before when they said the could come out?) Also called AHS and explained the situation and asked to have the $75 service fee waved, which they agreed to do. The tech arrived about 11am installed the part and was finished about noon. Between the initial call and the repair visit I end up missing almost a whole day of work.
"