Get matched with top epoxy flooring pros in Hale, CO

If your garage floor is heavily soiled or stained, then it’s a good idea to powerwash it with a concrete cleaner before sealing. This process will remove dirt and debris to help the new sealer bond to the concrete properly, and it will also improve the look of your sealed garage floor. After power washing your floor, make sure you let the concrete dry completely before applying sealant, usually for 24 to 48 hours.

The lifespan of stained concrete can range from five years to a lifetime, depending on the type of stain used and how well it is maintained. Acid-based stains penetrate the concrete and can last 20 years or more, while water-based stains are less durable and may last around five years, especially on outdoor surfaces exposed to UV light and weather. To preserve the color and extend the life of the finish, stained concrete should be properly sealed and then resealed every three to five years. Factors like foot traffic, climate, and proper initial application also affect its longevity.

Yes, professionals offer slip-resistant options for added workplace safety.

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.