Get matched with top epoxy flooring pros in Wray, CO

Unlike staining concrete, painting concrete often results in chips and peeling over time. You can expect numerous touchups over the years if the concrete is in a high-traffic area. Since concrete paints are opaque, you may also find it more difficult to get the exact color results you want. Lastly, painting concrete can make it much more slippery unless you mix in an additive for traction.

Apply two coats of paint to a garage floor after priming for optimal results. The first coat serves as a base layer, providing adhesion and coverage. Allow the first coat to dry thoroughly before applying the second coat, typically after 12 to 24 hours. The second coat ensures even coverage and durability and enhances the floor's appearance. Additionally, applying two coats helps to create a more substantial barrier against stains, chemicals, and wear and tear, resulting in a longer-lasting finish. 

The actual moisture level that is acceptable for your concrete floor depends on what primer or flooring material you plan to install above it. For this reason, you should check the manufacturer’s instructions for the exact details.

Generally, the moisture levels should be 3.5% to 4.5%, although it does vary. Some products can handle higher levels of moisture, so you should always test your concrete before purchasing your flooring materials.

Most garage floor paints are epoxy-based and available in DIY kits. One-part epoxies are simpler to apply than two-part epoxies, which have a more involved process. Sometimes, people also use latex-based paint because it’s easier to clean up mistakes with soap and water. Either way, make sure your paint is specifically designed for concrete garage floors. It should say so on the label.