Get matched with top roofers in Crestone, CO

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

The most common slope range for roofs on houses in snowy areas is between 4/12 and 6/12, or 50%. A roof with a slope of less than 10%, or roughly a 2/12 pitch, won’t be effective at shedding snow. However, roofs that are too steep can allow large amounts of snow to build up and fall all at once, creating a hazard for those on the ground.

Green roofs are incredibly long-lasting. Some have life spans of up to 40 or 50 years. Since the roofs help to protect the rest of your home's roofing system, they can also extend the life of your existing roof.

Regular maintenance and inspections will help you get the most out of your green roof and ensure it lasts as long as possible.

Yes, removing a chimney is a difficult and major undertaking. Chimneys often provide structural support to a home, so if it's a load-bearing structure, you'll need to take extra precautions to maintain your home's integrity. A project of this complexity typically requires a structural engineer, a masonry contractor, and a demolition crew. The removal process may involve taking the chimney out brick by brick from inside the walls. The cost for chimney removal can range from $2,000 to $10,000, depending on the job's complexity. Due to the difficulty and cost, some homeowners opt to remove the fireplace and seal the chimney at the top and bottom, sometimes also removing the visible exterior portion at the roofline.