Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Willow Creek, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Willow Creek, CA?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Willow Creek

Ceramic Tile questions, answered by experts

Yes, you can tile over existing tiles in a bathroom, but it is not always recommended. For this method to be successful, the original tile surface must be clean, flat, and free of damage such as cracks, unevenness, mold, or mildew. While tiling over existing tiles can save time and money, there are potential drawbacks. The new adhesive may not bond properly, and the process adds extra weight to the wall or floor. Additionally, the increased height of the surface could interfere with door clearances. For the best and most durable results, removing the old tiles before installing new ones is generally the better option.

You can, in theory, tile your fireplace hearth with most tiles. However just because you can, doesn’t mean you should. For example, it’s much better to use unglazed tiles because glazed tiles are more resistant to cracking under extreme heat. Porcelain is more heat-resistant than ceramic, but you can still design the hearth as you like by putting the most heat-resistant tiles directly under the fire and, if it matches your style, add more decorative tiles further from the center of the fire. 

If you’re out of spacers for your tile installation, you can use pennies. Each time you place a tile, stick the pennies around the edges (on the sides and the corners). Like working with spacers, you’ll want the same amount of space around each tile before they set.

The cost to install porcelain tile is about $1,930 on average. Porcelain tile prices range from $880 to $3,000 or more. The average cost tends to be higher than ceramic tile because porcelain tile is very durable. Porcelain tile rating also factors into the material cost. Tile ratings are as follows:

  • Grade 0: Walls only

  • Grade 1: Walls and light traffic floors

  • Grade 2: Rooms with light traffic, but not kitchens or hallways

  • Grade 3: Kitchens, hallways, and entryways

  • Grade 4: Any area, interior or exterior

  • Grade 5: Highest durability good for any area, interior or exterior

Your floors should be completely level for tile, otherwise you risk damaging the tiles in the future. When there are even small gaps or hills in the subfloor beneath the tile, this puts more pressure on the tile when you walk around on the floor. With repeated traffic, the tiles are at risk of cracking, and you’ll have to deal with tile repairs sooner than if the floor was completely level.

The Willow Creek, CA homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.