Get matched with top driveway gate pros in Strathmore, CA

While many gate hinges are often made of extremely durable materials, such as galvanized steel, they can wear out after many years. How quickly they wear out also depends on how much use they’ve endured. It’s also possible for the hinge screws to fall out, which weakens the hinge. Once a hinge wears out, it’s time for a replacement so your gate doesn’t start sagging.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

The obvious disadvantage of an automatic gate is that it runs on electricity. If the power goes out, it won’t open or close unless there’s a manual override. Many homeowners will need a backup generator so they don’t get stuck on either side of the gate, particularly when looking to park a vehicle. Automatic gates are also much more complicated than manual gates, with tech-heavy components that make them more expensive to repair.

While it is possible to install a manual gate yourself, it is generally not recommended. Professional installation is strongly advised, especially for automated or large driveway gates. Gates can be extremely heavy, sometimes weighing hundreds of pounds, which makes them bulky and dangerous to maneuver into place. Proper installation requires perfect positioning and balancing to ensure the gate swings smoothly and functions as intended. For automated gates, the wiring is also hazardous and typically requires a licensed electrician. Mistakes during a DIY installation can be costly, as materials alone can average around $1,000. Given the safety risks and the difficulty of achieving a proper setup, it is best to hire a professional gate installer.