Get matched with top ceramic tile pros in Santa Maria, CA

To ensure an even and unbending surface to lay tiles on, you’ll typically need to put a subfloor under a tile floor. Fiber cement backboards are the most common choice, but using plywood is also possible. Don’t neglect this step, or you could risk water damage and grout or tiles prematurely cracking or crumbling, especially in an area with high foot traffic. 

Porcelain and ceramic tiles are made from clay, but porcelain tiles are fired in a kiln at a higher temperature. This makes them more durable, but it also means porcelain is more expensive than ceramic at $3 to $5 more per square foot.

Even with the higher price point, many people choose porcelain over ceramic because there are more color and design options.

You can technically install tile over tile, but we don’t suggest it. Installing tile over any surface that isn’t a completely flat and prepared subfloor will result in a shoddy overall job, uneven flooring, tiles that don’t adhere, extra weight, gaps, cracks, and room for moisture and dirt to enter. For the best results, only install new tile on a flat, sanded surface like subflooring or concrete that is prepared for tile.

If you have asbestos tile and would rather tile over it than remove it, or if your existing tile is completely flat and bonded tightly to the floor, you may be able to tile over existing tile. But experts recommend thinking twice before you do.

On average, tiling a bathroom involves about 12 hours of labor, usually spread over two to three days to accommodate prep work and curing times. A professional tiler can often complete the installation in 6 to 8 hours, whereas a DIYer might take 10 to 16 hours. The total project time is influenced by factors like the bathroom layout, tile type, and necessary prep work, such as removing old tile. The process includes specific timelines for different areas; for example, tiling a floor takes about six hours, while a shower area can take six to ten hours. It is essential to allow for adequate curing time—typically 24 hours each—for the mortar, grout, and caulk, which is why the project extends over several days.