Top-rated chimney repair specialists.

Best chimney repair specialists near Prunedale, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your chimney repair project in Prunedale, CA?

Select your specific project to find the pro for you.

Top-Rated Chimney repair specialists in Prunedale - Updated Nov 2026

OHMS Handyman Services
3.6(
10
)
Brick or Stone Fireplace - Repair

Serving Prunedale, CA and surrounding areas

In business since 1992

Emergency services offered

Credit card accepted

"I am quite happy with the electrical outlet and the bathroom fan, and I would hire him back for electrical work, as I think that is his specialty. His carpentry skills aren't the greatest, but they are not bad either. The first thing I asked was for the medicine cabinet to be centered over the sink, and it is about 1 inch off. At least it is hung level, though! The other disappointment was that he reused my 28-year old hinges and door knob on the new door. Also that the door frame was not cut correctly on one side and is about 2 inches short on one side. This could have been fixed easily by cutting a small piece of the extra wood that was left in my garbage. At least the door seems to be hung properly, though, so it was not a bad job, just not the greatest for the price.
"
Recommended by100%of homeowners
IY Development & Renovation, Inc.
5.0(
1
)
Pre-Fabricated Fireplace Unit (Non-Gas) - Repair

Serving Prunedale, CA and surrounding areas

In business since 2020

Free estimates

Credit card accepted

With years of experience in the construction industry, we are the experts you need to take care of your home or business. We handle all of your general contracting and HVAC needs with great care. We will treat your home as we would treat our own. Give IY Development & Renovation, Inc. a call today, we look forward to working with you! \n

Ram Co
New to Angi
Brick or Stone Fireplace (Gas) - RepairBrick or Stone Fireplace (Non-Gas) - Repair

Serving Prunedale, CA and surrounding areas

In business since 2023

Free estimates

Emergency services offered

Ram Co is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Chimney Repair FAQs, answered by experts

Yes, you can repair cat scratches on leather furniture. A quick fix that won’t repair roughness is a leather recoloring balm that helps scratches blend in. Otherwise, use the following process.

  1. Clean the area and trim loose fibers.

  2. Rub leather binding glue all over the affected area.

  3. Sand the area down with fine-grit sandpaper and clean off any residue.

  4. Fill holes, scratches, and gouges with leather putty from a leather repair kit.

  5. Sand the area down again and clean off any residue.

  6. Apply leather colorant in several layers.

  7. Seal the color in with a leather sealant and finish.

There are a few reasons that a drawer won't come out. Most of the time, there's an obstruction of some sort preventing the drawer from acting normally. The key to figuring out the problem is investigation and patience. 

If possible, open the drawer as far as it will go and shine a flashlight inside to see if something in the drawer is hitting the cabinet frame. Or, remove a drawer above or below the offending one and use the flashlight to investigate the drawer slides. Discovering the cause will likely provide the necessary information to develop a solution.

To prepare furniture for moving, detach furniture legs if possible. If the legs must stay on, wrap them with foam wrap or taped blankets to help prevent damage. You can also buy dedicated moving “socks” for furniture legs.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

  • Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

  • Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

  • Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

  • Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

It’s not recommended that you get rid of your mattress if you’re experiencing a bed bug infestation. This action could cause the infestation to spread to other people and homes. Instead of replacing your mattress, you should take steps to eliminate the bed bugs from the mattress and then focus on preventing further infestations.

The Prunedale, CA homeowners’ guide to chimney repairs

From average costs to expert advice, get all the answers you need to get your job done.