Best cabinet makers near Pleasanton, CA

It’s best to stick with lightweight cabinets, such as medium-density fiberboard, if you don’t have a wall stud to secure them to. Unless you’re attaching the cabinet to a flat board attached to wall studs, it’s best not to risk it with heavy cabinetry or contents. Solid wood cabinets and heavy dishware should be avoided if you cannot secure the cabinet to a wall stud. Either way, always check the weight on your wall anchors and be sure not to exceed it.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

As a homeowner, there are a few things you can do to prepare for your cabinet installer. Once the cabinets are ready for your home, you can do the following:

• Ensure pets are safely in another room, out of the way of open doors and large moving objects.

• Clear countertops for removal.

• Tidy the floor the installers will walk through and around. 

• Prepare to have the installers in your home for the entire day, for multiple days, until the project is done. Expect to have a noisy environment, especially if they will remove old, existing cabinets.  

It is generally more cost-effective to purchase stock or semi-custom cabinets than to have them custom-built. The best option depends on your budget and customization needs.

Here is a breakdown of the average costs per linear foot:

• Custom Cabinets: $500 to $1,200. The final price is influenced by factors like materials, size, and design complexity. For example, a basic slab cabinet door might cost $60 to $70 for materials, while a more intricate mullioned glass inset panel door can range from $100 to $200 per door.

• Semi-Custom Cabinets: $150 to $700.

• Stock Cabinets: $100 to $400. These are pre-built and the most affordable option, but they offer limited customization and may not be suitable for rooms with unusual shapes or high ceilings.